|
|
|
National Stock Number:
5307-00-827-5311
Federal Supply Class:
5307
National Item Identification Number:
008275311
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 005942 | 78640 | MITSUBISHI CATERPILLAR FORKLIFT AMERICA, INC | | 50435 | 96046 | CRANE PUMPS & SYSTEMS PFT CORP | | 889842 | 12603 | CLARK EQUIPMENT CO | | X04038 | 14351 | TELEDYNE CONTINENTAL MOTORS INDUSTRIAL PRODUCTS DIV TELEDYNE INDUSTRIES INC SUB OF TELEDYNE INC | | X4038 | 14351 | TELEDYNE CONTINENTAL MOTORS INDUSTRIAL PRODUCTS DIV TELEDYNE INDUSTRIES INC SUB OF TELEDYNE INC | | 889842 | 77237 | DANA OFF HIGHWAY PRODUCTS, LLC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 8640 | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE | | OVERALL LENGTH | 1.500 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNC NUT THREAD | | UNC STUD THREAD | | NOMINAL THREAD SIZE | 0.250 INCHES NUT THREAD | | 0.250 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD QUANTITY PER INCH | 20 NUT THREAD | | 20 STUD THREAD | | THREAD PITCH DIAMETERS | 0.2193 TO 0.2213 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.750 INCHES MAXIMUM NUT THREAD | | 0.406 INCHES MAXIMUM STUD THREAD | | HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND | | 36.0 ROCKWELL C MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 77237 | | DESIGN CONTROL REFERENCE | 889842 |
|
|