|
|
|
National Stock Number:
5307-00-818-5732
Federal Supply Class:
5307
National Item Identification Number:
008185732
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 32-33270-3 | 76301 | THE BOEING COMPANY |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4130 | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 COND A MIL SPEC SINGLE MATERIAL RESPONSE | | SURFACE TREATMENT | CADMIUM OVERALL | | OVERALL LENGTH | 3.650 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNF STUD THREAD | | NOMINAL THREAD SIZE | 0.250 INCHES NUT THREAD | | 0.250 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | 3A STUD THREAD | | THREAD QUANTITY PER INCH | 28 NUT THREAD | | 28 STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.400 INCHES MINIMUM NUT THREAD | | 0.400 INCHES MINIMUM STUD THREAD | | SPECIAL FEATURES | STUD END DRILLED FOR COTTER PIN,0.170 IN. DISTANCE FROM COTTER PIN HOLE CENTERLINE TO STUD END,0.076 IN.COTTER PIN HOLE DIAMETER | | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.076 INCHES NOMINAL FIRST HOLE | | COTTER PIN HOLE DIAMETER | 0.170 INCHES NOMINAL FIRST HOLE | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 76301 | | DESIGN CONTROL REFERENCE | 32-33270-3 |
|
|