|
|
|
National Stock Number:
5307-00-776-7316
Federal Supply Class:
5307
National Item Identification Number:
007767316
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 401872J | 02978 | RENK AMERICA LLC | | 7767316 | 00000 | ORDNANCE CORPS |
|
Techincal Specification:
| MATERIAL | STEEL COMP 8640 | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE | | SURFACE TREATMENT | CADMIUM OVERALL | | OVERALL LENGTH | 3.500 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNS NUT THREAD | | UNF STUD THREAD | | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD | | 0.375 INCHES STUD THREAD | | THREAD CLASS | 3A STUD THREAD | | THREAD QUANTITY PER INCH | 16 NUT THREAD | | 24 STUD THREAD | | THREAD PITCH DIAMETERS | 0.3525 TO 0.3541 INCHES NUT THREAD | | THREAD LENGTH | 0.750 INCHES MINIMUM NUT THREAD | | 0.620 INCHES MINIMUM STUD THREAD | | HARDNESS RATING | 28.0 ROCKWELL C MINIMUM AND | | 34.0 ROCKWELL C MAXIMUM | | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.110 INCHES NOMINAL FIRST HOLE | | COTTER PIN HOLE DIAMETER | 0.065 INCHES MINIMUM AND | | 0.072 INCHES MAXIMUM FIRST HOLE |
|
|