5307-00-741-0015 STUD,PLAIN Index 5307-00-741-0018 STUD,PLAIN

National Stock Number:
5307-00-741-0016

Federal Supply Class:
5307

National Item Identification Number:
007410016

Description:
STUD,PLAIN

Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.


Manufacturer Information:
200247H02978RENK AMERICA LLC
200247H602978RENK AMERICA LLC
2028H60AHP5CURTISS-WRIGHT CONTROLS, INC.
741001619207U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM


Techincal Specification:
MATERIALSTEEL COMP 3140
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6332 ASSN STD SINGLE MATERIAL RESPONSE
OVERALL LENGTH1.125 INCHES NOMINAL
THREAD SERIES DESIGNATORUNF NUT THREAD
UNS STUD THREAD
NOMINAL THREAD SIZE0.250 INCHES NUT THREAD
0.250 INCHES STUD THREAD
THREAD CLASS3A NUT THREAD
THREAD QUANTITY PER INCH28 NUT THREAD
20 STUD THREAD
THREAD PITCH DIAMETERS0.2261 TO 0.2274 INCHES STUD THREAD
THREAD DIRECTIONRIGHT-HAND NUT THREAD
RIGHT-HAND STUD THREAD
THREAD LENGTH0.470 INCHES MINIMUM NUT THREAD
0.500 INCHES MINIMUM STUD THREAD
SPECIAL FEATURESSTUD END THREAD 0.003 IN. OVERSIZE
HARDNESS RATING26.0 ROCKWELL C MINIMUM AND
32.0 ROCKWELL C MAXIMUM
DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END0.109 INCHES NOMINAL FIRST HOLE
COTTER PIN HOLE DIAMETER0.065 INCHES MINIMUM AND
0.072 INCHES MAXIMUM FIRST HOLE


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us