|
|
|
National Stock Number:
5307-00-653-3234
Federal Supply Class:
5307
National Item Identification Number:
006533234
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 332C254P2 | 07482 | GENERAL ELECTRIC COMPANY | | 332C254P2 | 24446 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| MATERIAL | STEEL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | OVERALL LENGTH | 1.380 INCHES MINIMUM AND | | 1.420 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | NOMINAL THREAD SIZE | 0.312 INCHES NUT THREAD | | 0.312 INCHES STUD THREAD | | THREAD CLASS | 2A NUT THREAD | | 2A STUD THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD | | 18 STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.640 INCHES MINIMUM AND | | 0.680 INCHES MAXIMUM NUT THREAD | | 0.660 INCHES MINIMUM AND | | 0.700 INCHES MAXIMUM STUD THREAD | | SPECIAL FEATURES | STUD END 60% LOK-THRED | | HARDNESS RATING | 28.0 ROCKWELL C MINIMUM AND | | 34.0 ROCKWELL C MAXIMUM | | SURFACE FINISH | 63.0 MICROINCHES OVERALL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 07482 | | DESIGN CONTROL REFERENCE | 332C254P2 |
|
|