|
|
|
National Stock Number:
5307-00-637-5239
Federal Supply Class:
5307
National Item Identification Number:
006375239
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 5112658 | 24617 | GENERAL MOTORS CORP | | 5112658 | 72582 | ROLLS-ROYCE SOLUTIONS AMERICA INC | | 5184309 | 72582 | ROLLS-ROYCE SOLUTIONS AMERICA INC | | 5112658 | 7X677 | GENERAL MOTORS LLC |
|
Techincal Specification:
| MATERIAL | STEEL | | OVERALL LENGTH | 6.625 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNC STUD THREAD | | NOMINAL THREAD SIZE | 0.625 INCHES NUT THREAD | | 0.625 INCHES STUD THREAD | | THREAD CLASS | 2A NUT THREAD | | THREAD QUANTITY PER INCH | 18 NUT THREAD | | 11 STUD THREAD | | THREAD PITCH DIAMETERS | 0.5770 TO 0.5810 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 1.250 INCHES MINIMUM NUT THREAD | | 2.250 INCHES MINIMUM STUD THREAD | | SPECIAL FEATURES | STUD END HAS SAW CUT 0.120 IN. W0.028 IN. DEEP PARALLEL TO AXIS | | HARDNESS RATING | 34.0 ROCKWELL C MINIMUM AND | | 38.0 ROCKWELL C MAXIMUM |
|