|
|
|
National Stock Number:
5307-00-558-5175
Federal Supply Class:
5307
National Item Identification Number:
005585175
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 11-31884-1 | 1UF60 | U.S.A. SPARES INC. | | 11-31884-1 | 2V343 | APEX MANUFACTURING COMPANY, INC. | | 11-31884-1 | 80020 | NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION CODE 4.8.8.0.0.B BLDG 148-2 |
|
Techincal Specification:
| OVERALL LENGTH | 4.531 INCHES MINIMUM AND | | 4.593 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNF STUD THREAD | | NOMINAL THREAD SIZE | 0.500 INCHES NUT THREAD | | 0.500 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | 3A STUD THREAD | | THREAD QUANTITY PER INCH | 20 NUT THREAD | | 20 STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.875 INCHES MINIMUM NUT THREAD | | 0.875 INCHES MINIMUM STUD THREAD | | CRITICALITY CODE JUSTIFICATION | AGAV | | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.250 INCHES NOMINAL FIRST HOLE | | COTTER PIN HOLE DIAMETER | 0.106 INCHES NOMINAL FIRST HOLE | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 80020 | | DESIGN CONTROL REFERENCE | 11-31884-1 |
|
|