|
|
|
National Stock Number:
5307-00-527-4476
Federal Supply Class:
5307
National Item Identification Number:
005274476
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 214-040-472-9 | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| STEEL COMP E4340 | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000,C4 MIL SPEC ALL MATERIAL RESPONSES | | OVERALL LENGTH | 2.196 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNS STUD THREAD | | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD | | 0.375 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD | | 16 STUD THREAD | | THREAD PITCH DIAMETERS | 0.3482 TO 0.3497 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.688 INCHES NOMINAL NUT THREAD | | 0.938 INCHES NOMINAL STUD THREAD | | HARDNESS RATING | 27.0 ROCKWELL C MINIMUM AND | | 32.0 ROCKWELL C MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES NUT THD | | 63.0 MICROINCHES SHANK | | 32.0 MICROINCHES STUD THD | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 97499 | | DESIGN CONTROL REFERENCE | 214-040-472-9 | | MATERIAL | STEEL COMP 4340 OR |
|
|