|
|
|
National Stock Number:
5307-00-406-4557
Federal Supply Class:
5307
National Item Identification Number:
004064557
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 9H1020 | 11083 | CATERPILLAR INC |
|
Techincal Specification:
| MATERIAL | STEEL | | MATERIAL DOCUMENT AND CLASSIFICATION | 1E121 FSCM 11083 MFR REF SINGLE MATERIAL RESPONSE | | OVERALL LENGTH | 1.700 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNC STUD THREAD | | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD | | 0.375 INCHES STUD THREAD | | THREAD CLASS | 2A NUT THREAD | | 2A STUD THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD | | 16 STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.750 INCHES MINIMUM NUT THREAD | | 0.640 INCHES MINIMUM STUD THREAD | | SPECIAL FEATURES | TAPER STUD END 12.30DEGREES BY .180 IN. | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 11083 | | DESIGN CONTROL REFERENCE | 9H1020 |
|