| MATERIAL | STEEL COMP 8735 OR |
| STEEL OR |
| STEEL COMP 8740 |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6320 ASSN STD 1ST MATERIAL RESPONSE OR |
| AMS 6300 ASSN STD 2ND MATERIAL RESPONSE OR |
| AMS 6322 ASSN STD 3RD MATERIAL RESPONSE |
| SURFACE TREATMENT | CADMIUM OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| OVERALL LENGTH | 2.000 INCHES NOMINAL |
| THREAD SERIES DESIGNATOR | UNF NUT THREAD |
| UNC STUD THREAD |
| NOMINAL THREAD SIZE | 0.250 INCHES NUT THREAD |
| 0.250 INCHES STUD THREAD |
| THREAD QUANTITY PER INCH | 28 NUT THREAD |
| 20 STUD THREAD |
| THREAD PITCH DIAMETERS | 0.2175 TO 0.2195 INCHES NUT THREAD |
| 0.2238 TO 0.2251 INCHES STUD THREAD |
| THREAD DIRECTION | RIGHT-HAND NUT THREAD |
| RIGHT-HAND STUD THREAD |
| THREAD LENGTH | 0.702 INCHES MINIMUM AND |
| 0.738 INCHES MAXIMUM NUT THREAD |
| 0.755 INCHES MINIMUM AND |
| 0.805 INCHES MAXIMUM STUD THREAD |
| HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND |
| 38.0 ROCKWELL C MAXIMUM |
| DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.090 INCHES NOMINAL FIRST HOLE |
| COTTER PIN HOLE DIAMETER | 0.074 INCHES MINIMUM AND |
| 0.081 INCHES MAXIMUM FIRST HOLE |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 80254 |
| DESIGN CONTROL REFERENCE | 25D-16-P03 |