|
|
|
National Stock Number:
5307-00-376-5647
Federal Supply Class:
5307
National Item Identification Number:
003765647
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 26624-3 | 45934 | ONTIC ENGINEERING & MANUFACTURING, INC | | 26624-3 | 70210 | HONEYWELL INTERNATIONAL INC. | | 26624-3 | 72599 | ALLIEDSIGNAL INC DBA ALLIED-SIGNAL AEROSPACE CO |
|
Techincal Specification:
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5736 ASSN STD SINGLE MATERIAL RESPONSE | | OVERALL LENGTH | 2.230 INCHES MINIMUM AND 2.310 INCHES MAXIMUM | | MATERIAL | IRON ALLOY 660 | | NOMINAL THREAD SIZE | 0.112 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.112 INCHES STUD THREAD | | THREAD CLASS | 3A LOCATION NOT OTHERWISE SPECIFIED | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.330 INCHES MINIMUM AND 0.370 INCHES MAXIMUM STUD THREAD | | THREAD LENGTH | 0.610 INCHES MINIMUM AND 0.650 INCHES MAXIMUM NUT THREAD | | THREAD PITCH DIAMETERS | +0.0979 TO 0.0995 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNF STUD THREAD | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) NUT THREAD | | THREAD QUANTITY PER INCH | 40 NUT THREAD | | THREAD QUANTITY PER INCH | 48 STUD THREAD |
|
|