|
|
|
National Stock Number:
5307-00-358-9583
Federal Supply Class:
5307
National Item Identification Number:
003589583
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 78135-526 | 11599 | TRIUMPH ENGINE CONTROL SYSTEMS LLC |
|
Techincal Specification:
| MATERIAL | STEEL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5613 ASSN STD SINGLE MATERIAL RESPONSE | | OVERALL LENGTH | 1.610 INCHES MINIMUM AND | | 1.640 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNJF NUT THREAD | | UNJC STUD THREAD | | NOMINAL THREAD SIZE | 0.312 INCHES NUT THREAD | | 0.312 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | 3A STUD THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD | | 18 STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.680 INCHES MINIMUM AND | | 0.760 INCHES MAXIMUM NUT THREAD | | 0.620 INCHES MINIMUM AND | | 0.730 INCHES MAXIMUM STUD THREAD | | HARDNESS RATING | 38.0 ROCKWELL C MINIMUM AND | | 42.0 ROCKWELL C MAXIMUM | | SURFACE FINISH | 125.0 MICROINCHES OVERALL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 11599 | | DESIGN CONTROL REFERENCE | 78135-526 |
|
|