|
|
|
National Stock Number:
5307-00-298-4483
Federal Supply Class:
5307
National Item Identification Number:
002984483
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| S8148H524-112 | 70210 | HONEYWELL INTERNATIONAL INC. | | S8148H524-112 | 72599 | ALLIEDSIGNAL INC DBA ALLIED-SIGNAL AEROSPACE CO |
|
Techincal Specification:
| COTTER PIN HOLE DIAMETER | 0.076 INCHES NOMINAL FIRST HOLE | | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM FIRST HOLE | | OVERALL LENGTH | 1.375 INCHES NOMINAL | | MATERIAL | STEEL | | NOMINAL THREAD SIZE | 0.312 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.312 INCHES STUD THREAD | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.562 INCHES MINIMUM AND 0.624 INCHES MAXIMUM NUT THREAD | | THREAD LENGTH | 0.656 INCHES MINIMUM AND 0.718 INCHES MAXIMUM STUD THREAD | | THREAD PITCH DIAMETERS | +0.2794 TO 0.2817 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD | | THREAD QUANTITY PER INCH | 18 STUD THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD |
|
|