|
|
|
National Stock Number:
5307-00-298-3145
Federal Supply Class:
5307
National Item Identification Number:
002983145
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 6714938 | 24617 | GENERAL MOTORS CORP | | 6714938 | 73342 | ALLISON TRANSMISSION INC |
|
Techincal Specification:
| HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 1.031 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6098 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 8735 | | NOMINAL THREAD SIZE | 0.312 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.312 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.437 INCHES MINIMUM STUD THREAD | | THREAD LENGTH | 0.468 INCHES MINIMUM NUT THREAD | | THREAD PITCH DIAMETERS | +0.2874 TO 0.2894 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD | | THREAD QUANTITY PER INCH | 24 STUD THREAD |
|
|