|
|
|
National Stock Number:
5307-00-279-3781
Federal Supply Class:
5307
National Item Identification Number:
002793781
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 1293035-101 | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| COTTER PIN HOLE DIAMETER | 0.374 INCHES MINIMUM AND 0.381 INCHES MAXIMUM FIRST HOLE | | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.380 INCHES NOMINAL FIRST HOLE | | OVERALL LENGTH | 5.570 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP E4340 | | NOMINAL THREAD SIZE | 0.875 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.875 INCHES STUD THREAD | | SPECIAL FEATURES | NUT END RECESSED TO 0.750 IN. DIA BY 0.750 IN. LG | | THREAD CLASS | 3A NUT THREAD | | THREAD CLASS | 3A STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD LENGTH | 1.200 INCHES NOMINAL STUD THREAD | | THREAD LENGTH | 1.300 INCHES NOMINAL NUT THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNF STUD THREAD | | THREAD QUANTITY PER INCH | 14 NUT THREAD | | THREAD QUANTITY PER INCH | 14 STUD THREAD |
|