|
|
|
National Stock Number:
5307-00-272-6342
Federal Supply Class:
5307
National Item Identification Number:
002726342
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
|
Techincal Specification:
| HARDNESS RATING | 89.0 ROCKWELL C MINIMUM | | OVERALL LENGTH | 6.031 INCHES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | MATERIAL | STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1023 OR STEEL COMP 1524 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1527 OR STEEL COMP 1029 OR STEEL COMP 1030 OR STEEL COMP 1033 OR STEEL COMP 1034 OR STEEL COMP 1035 | | NOMINAL THREAD SIZE | 0.500 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.500 INCHES STUD THREAD | | THREAD CLASS | 2A NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.812 INCHES MINIMUM NUT THREAD | | THREAD LENGTH | 0.812 INCHES MINIMUM STUD THREAD | | THREAD PITCH DIAMETERS | +0.4517 TO 0.4536 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) NUT THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD | | THREAD QUANTITY PER INCH | 13 NUT THREAD | | THREAD QUANTITY PER INCH | 13 STUD THREAD |
|
|