|
|
|
National Stock Number:
5307-00-263-7287
Federal Supply Class:
5307
National Item Identification Number:
002637287
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 7005171 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.188 INCHES NOMINAL FIRST HOLE | | COTTER PIN HOLE DIAMETER | 0.188 INCHES NOMINAL FIRST HOLE | | HARDNESS RATING | 27.0 ROCKWELL C NOMINAL | | NOMINAL THREAD SIZE | 0.750 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.750 INCHES STUD THREAD | | OVERALL LENGTH | 4.125 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 1040 | | THREAD CLASS | 2A NUT THREAD | | THREAD CLASS | 2A STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 1.375 INCHES MINIMUM STUD THREAD | | THREAD LENGTH | 1.875 INCHES MINIMUM NUT THREAD | | THREAD QUANTITY PER INCH | 16 NUT THREAD | | THREAD QUANTITY PER INCH | 16 STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNF STUD THREAD |
|
|