|
|
|
National Stock Number:
5307-00-253-1554
Federal Supply Class:
5307
National Item Identification Number:
002531554
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 204767-1 | 70210 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| CRITICALITY CODE JUSTIFICATION | TEST | | HARDNESS RATING | 35.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE | | OVERALL LENGTH | 0.880 INCHES MINIMUM AND 0.900 INCHES MAXIMUM | | MATERIAL | STEEL | | NOMINAL THREAD SIZE | 0.250 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.250 INCHES STUD THREAD | | SURFACE FINISH | 125.0 MICROINCHES OVERALL | | TEST DATA DOCUMENT | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD LENGTH | 0.230 INCHES MINIMUM AND 0.240 INCHES MAXIMUM STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD CLASS | 3A STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.390 INCHES MINIMUM AND 0.400 INCHES MAXIMUM NUT THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNF STUD THREAD | | THREAD QUANTITY PER INCH | 28 NUT THREAD | | THREAD QUANTITY PER INCH | 28 STUD THREAD |
|
|