5330-14-451-2577 PACKING,PREFORMED Index 5365-14-451-2595 SHIM

National Stock Number:
5306-14-451-2594

Federal Supply Class:
5306

National Item Identification Number:
144512594

Description:
PIN,HEADED,THREADED

Detail:
(ALL EXCEPT USA) A CONNECTING AND/OR ARTICULATING DEVICE HAVING A CYLINDRICAL SHANK WITH A HEAD AT ONE END AND A THREADED PORTION AT THE OTHER END. THE UNTHREADED PORTION IS OF A SPECIFIC GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001) OF AN INCH (25 MICRONS) OR LESS, OF A SPECIFIC DIAMETER FOR ITEMS ONE INCH (25.4 MM) OR LESS IN DIAMETER. ITEMS OVER ONE INCH (25.4 MM) IN DIAMETER, SHALL HAVE A TOLERANCE OF FIFTEEN TEN-THOUSANDTHS (0.0015) OF AN INCH (38 MICRONS) OR LESS. THE SPECIFIC RMS NICROINCH FINISH ON THE BEARING SURFACE MUST NOT EXCEED 32 MICROINCHES (0.8 MICRON). THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001) OF AN INCH (25 MICRONS) BELOW THE MINIMUM SHANK DIAMETER. THE HEAD IS DESIGNED TO ACCOMMODATE AN EXTERNAL WRENCH OR DRIVER AND/OR MAY HAVE FLATS OR SIMILAR FEATURES FOR POSITIONING OR SECURING. THE ITEM MAY BE INTERNALLY RELIEVED WITH A CONCENTRIC HOLE ALONG THE LONGITUDINAL CENTERLINE WHICH MAY EXTEND A PART OR WHOLE OF ITS LENGTH. EXCLUDES BOLT, CLOSE TOLERANCE; BOLT, SHEAR; BOLT, SHOULDER; AND BOLT, INTERNALLY RELIEVED BODY.


Manufacturer Information:
33411BE050013LEF6117DASSAULT AVIATION


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER19.2 MILLIMETERS MINIMUM AND 19.4 MILLIMETERS MAXIMUM
FASTENER LENGTH23.2 MILLIMETERS MINIMUM AND 23.8 MILLIMETERS MAXIMUM
GRIP DIAMETER4.982 MILLIMETERS MINIMUM AND 4.990 MILLIMETERS MAXIMUM
GRIP LENGTH12.7 MILLIMETERS MINIMUM AND 13.0 MILLIMETERS MAXIMUM
HEAD HEIGHT1.55 MILLIMETERS MINIMUM AND 1.80 MILLIMETERS MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONF3025 AIR 9160C MIL STD SINGLE MATERIAL RESPONSE
MATERIALSTEEL COMP 30NCD16
MINIMUM TENSILE STRENGTH1080 MEGAPASCALS
MINIMUM YIELD STRENGTH880 MEGAPASCALS
NOMINAL THREAD DIAMETER0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER1.778 MILLIMETERS MINIMUM AND 2.032 MILLIMETERS MAXIMUM
WIDTH BETWEEN FLATS9.27 MILLIMETERS MINIMUM AND 9.57 MILLIMETERS MAXIMUM
SURFACE FINISH0.8 MICROMETERS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONNF L 09-753 CODE LE NATIONAL SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD QUANTITY PER INCH32
THREAD SERIES DESIGNATORUNJF


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us