| CHAMFER ANGLE | 30.0 DEGREES NOMINAL |
| EXTENDED WASHER THICKNESS | 0.026 INCHES MINIMUM AND 0.046 INCHES MAXIMUM |
| EXTENDED WASHER DIAMETER | 0.460 INCHES MINIMUM AND 0.470 INCHES MAXIMUM |
| FASTENER LENGTH | 0.9325 INCHES NOMINAL |
| GRIP DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| GRIP LENGTH | 0.4375 INCHES NOMINAL |
| HEAD HEIGHT | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| HEAD MINOR DIAMETER | 0.235 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| HEAD STYLE | SPLINE EXTENDED WASHER |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5662, 5663, OR 5962 AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | NICKEL ALLOY 718 OVERALL |
| MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.2500 INCHES |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, TENSION, NICKEL ALLOY 718, 220 KSI FTU EXTERNAL WRENCHING, SPLINE DRIVE, FLANGED HEAD |
| SPECIFICATION/STANDARD DATA | 80205-NAS-14181 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2700, METHOD 1, TYPE 2 OR TYPE 8, CLASS 4 NATIONAL STD SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.495 INCHES MINIMUM |
| THREAD QUANTITY PER INCH | 28 |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |