| CHAMFER ANGLE | 30.0 DEGREES MINIMUM AND 45.0 DEGREES MAXIMUM |
| EXTENDED WASHER THICKNESS | 0.035 INCHES MINIMUM AND 0.055 INCHES MAXIMUM |
| EXTENDED WASHER DIAMETER | 0.575 INCHES MINIMUM AND 0.585 INCHES MAXIMUM |
| FASTENER LENGTH | 1.416 INCHES MINIMUM AND 1.446 INCHES MAXIMUM |
| GRIP DIAMETER | 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM |
| GRIP LENGTH | 0.9275 INCHES MINIMUM AND 0.9475 INCHES MAXIMUM |
| HEAD HEIGHT | 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM |
| HEAD MINOR DIAMETER | 0.360 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| HEAD STYLE | SPLINE EXTENDED WASHER |
| MATERIAL DOCUMENT AND CLASSIFICATION | |
| MATERIAL | |
| MINIMUM TENSILE STRENGTH | 11100 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.3125 INCHES |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, TENSION, STEEL, 180 KSI FTU, 450 F EXTERNAL WRENCHING, SPLINE DRIVE, FLANGED |
| SPECIFICATION/STANDARD DATA | 80205-NAS-21134 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | UNABLE TO DECODE |
| SURFACE TREATMENT | UNABLE TO DECODE |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.531 INCHES MINIMUM AND 0.551 INCHES MAXIMUM |
| THREAD QUANTITY PER INCH | 24 |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |