| CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 0.9535 INCHES MINIMUM AND 0.9635 INCHES MAXIMUM OVERALL |
| EXTENDED WASHER DIAMETER | 0.639 INCHES MINIMUM AND 0.649 INCHES MAXIMUM |
| EXTENDED WASHER THICKNESS | 0.081 INCHES MINIMUM AND 1.101 INCHES MAXIMUM |
| FASTENER LENGTH | 1.1615 INCHES MINIMUM AND 1.1915 INCHES MAXIMUM |
| GRIP LENGTH | 0.5625 INCHES MINIMUM |
| GRIP DIAMETER | 0.3740 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM |
| HEAD HEIGHT | 0.378 INCHES MINIMUM AND 0.398 INCHES MAXIMUM |
| HEAD STYLE | DOUBLE HEXAGON W/HOLE |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE OVERALL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,SHEAR |
| MATERIAL | STEEL COMP XM-13 OVERALL |
| MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.375 INCHES |
| SHANK UNTHREADED HOLE DIAMETER | 0.106 INCHES MINIMUM AND 0.111 INCHES MAXIMUM OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS270 METHOD 1 NATIONAL STD/SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | UNABLE TO DECODE |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.614 INCHES NOMINAL |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| THREAD QUANTITY PER INCH | 24 |
| WIDTH BETWEEN FLATS | 0.439 INCHES NOMINAL |