| CHAMFER ANGLE | 30.0 DEGREES NOMINAL AND 45.0 DEGREES NOMINAL |
| EXTENDED WASHER THICKNESS | 0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| EXTENDED WASHER DIAMETER | 1.153 INCHES MINIMUM AND 1.163 INCHES MAXIMUM |
| FASTENER LENGTH | 4.515 INCHES MINIMUM AND 4.545 INCHES MAXIMUM |
| GRIP DIAMETER | 0.6230 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM |
| GRIP LENGTH | 3.490 INCHES MINIMUM AND 3.510 INCHES MAXIMUM |
| HEAD HEIGHT | 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM |
| HEAD MINOR DIAMETER | 0.673 INCHES MINIMUM AND 0.688 INCHES MAXIMUM |
| HEAD STYLE | SPLINE EXTENDED WASHER |
| MATERIAL DOCUMENT AND CLASSIFICATION | |
| MATERIAL | UNABLE TO DECODE |
| MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.6250 INCHES |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, TENSION, NICKEL ALLOY 718, 220 KSI FTU, EXTERNAL WRENCHING, SPLINE DRIVE, FLANGED HEAD |
| SPECIAL FEATURES | MATERIAL: NICKEL ALLOY 718 WITH CHEMISTRY OF AMS5662 (UNS N07718), AMS5663 (UNS N07718) OR AMS5962 (UNS N07718). FINISH: CADMIUM PLATED PARTS PER AMS-QQ-P-416, TYPE II, CLASS 2, UP TO 450 F APPLICATION ENVIRONMENT. HEAT TREAT: 220 KSI MINIMUM ULTIMATE TENSILE STRENGTH PER AMS2750. |
| SPECIFICATION/STANDARD DATA | 80205-NAS-14181 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| SURFACE TREATMENT | CADMIUM OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | UNABLE TO DECODE |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 1.005 INCHES MINIMUM |
| THREAD QUANTITY PER INCH | 18 |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |