| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| FASTENER LENGTH | 0.910 INCHES MINIMUM AND 0.940 INCHES MAXIMUM |
| GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| GRIP LENGTH | 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM |
| HAZARDOUS SUBSTANCES | CADMIUM |
| HEAD HEIGHT | 0.049 INCHES NOMINAL |
| HEAD DIAMETER | 0.2578 INCHES MINIMUM AND 0.3047 INCHES MAXIMUM |
| HEAD STYLE | FLAT COUNTERSUNK |
| MATERIAL DOCUMENT AND CLASSIFICATION | |
| MATERIAL | UNABLE TO DECODE |
| MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.1900 INCHES |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, SHEAR, 100 DEG FLUSH REDUCED HEAD, OFFSET CRUCIFORM - RIBBED, 95 KSI FSU |
| SPECIAL FEATURES | MATERIAL: CRES - A286 (UNS S66286) SHALL CONFORM TO THE CHEMISTRY OF AMS5731, AMS5732, AMS5737 OR AMS5853. FINISH: CADMIUM PLATE PER AMS-QQ-P-416, TYPE II, CLASS 2. P = CADMIUM PLATE. R = FOLLOWING DIA DASH NUMBER INDICATES RIBBED OFFSET CRUCIFORM RECESS PER NASM14191. HEAT TREAT: AMS-H-81200 = 160-190 KSI FTU. |
| SPECIFICATION/STANDARD DATA | 80205-NAS1581 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | UNABLE TO DECODE |
| SURFACE TREATMENT | UNABLE TO DECODE |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.363 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 32 |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |