| FASTENER LENGTH | 1.001 INCHES MINIMUM AND 1.031 INCHES MAXIMUM |
| GRIP DIAMETER | 0.3740 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM |
| GRIP LENGTH | 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM |
| HEAD HEIGHT | 0.188 INCHES MINIMUM AND 0.203 INCHES MAXIMUM |
| HEAD STYLE | DISHED HEXAGON |
| HOLE CONFIGURATION STYLE | HEXAGON CORNERS |
| HOLE DIAMETER | 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
| HOLE QUANTITY | 3 |
| HOLE TYPE | DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | |
| MATERIAL | UNABLE TO DECODE |
| MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.3750 INCHES |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, TENSION, HEX HEAD, CLOSE TOLERANCE, A286 CRES, LONG THREAD, REDUCED MAJOR THREAD DIA.,NONLOCKING, 160 KSI FTU |
| SPECIAL FEATURES | MATERIAL: CRES - A286 (UNS S66286) CONFORMING TO THE CHEMISTRY OF AMS5731, AMS5732, AMS5737 OR AMS5853. FINISH: PASSIVATED PER AMS2700, METHOD 1, TYPE 2 OR TYPE 8, CLASS 4. H= DRILLED HEAD. UNDRILLED SHANK. HEAT TREATMENT: AMS2759 - 160 TO 190 KSI FTU. NONLOCKING. |
| SPECIFICATION/STANDARD DATA | 80205-NAS6703 THRU NAS6720 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | UNABLE TO DECODE |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.578 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 24 |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| WIDTH BETWEEN FLATS | 0.554 INCHES MINIMUM AND 0.564 INCHES MAXIMUM |