| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| FASTENER LENGTH | 1.048 INCHES MINIMUM AND 1.078 INCHES MAXIMUM |
| GRIP DIAMETER | 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM |
| GRIP LENGTH | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |
| HEAD DIAMETER | 0.577 INCHES MINIMUM |
| HEAD HEIGHT | 0.133 INCHES NOMINAL |
| HEAD STYLE | FILLISTER COUNTERSUNK |
| MATERIAL DOCUMENT AND CLASSIFICATION | |
| MATERIAL | UNABLE TO DECODE |
| MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.3125 INCHES |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, 100 DEG FLAT HEAD, OFFSET CRUCIFORM, 180 KSI |
| SPECIAL FEATURES | MATERIAL - A286 (UNS S66286) PER AMS5731, AMS5732, AMS5737 OR AMS5853 EXCEPT HEAT TREAT TO 180 KSI MIN. FINISH - CLEAN AND PASSIVATE PER AMS2700 METHOD 1, CLASS 4. P = ALUMINUM COAT IAW NAS4006. T = OFFSET CRUCIFORM RECESS. CRES: 180-210 KSI FTU. DOUBLE SHEAR STRENGTH: 16,600 LBF MIN. APPLY THE LUBRICANT ON P CODE BOLTS ONLY AFTER THE NAS4006 COATING IS APPLIED. |
| SPECIFICATION/STANDARD DATA | 80205-NAS2832 THRU NAS2840 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | |
| SURFACE TREATMENT | |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.438 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 24 |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |