| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.371 INCHES MINIMUM AND 1.381 INCHES MAXIMUM OVERALL |
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| FASTENER LENGTH | 1.198 INCHES MINIMUM AND 1.228 INCHES MAXIMUM |
| GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| GRIP LENGTH | 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM |
| HEAD HEIGHT | 0.048 INCHES NOMINAL |
| HEAD DIAMETER | 0.2516 INCHES MINIMUM |
| HEAD STYLE | FILLISTER COUNTERSUNK |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, FLAT, 100 DEG REDUCED HEAD, OFFSET CRUCIFORM, 108 KSI FSU |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS5731 INTERNATIONAL STD/SPEC ALL MATERIAL RESPONSES OR AMS5732 INTERNATIONAL STD/SPEC ALL MATERIAL RESPONSES OR AMS5737 INTERNATIONAL STD/SPEC ALL MATERIAL RESPONSES OVERALL |
| MATERIAL | STEEL CORROSION RESISTING OVERALL |
| MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.1900 INCHES |
| SHANK UNTHREADED HOLE DIAMETER | 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM OVERALL |
| SPECIAL FEATURES | MATERIAL - A286 (UNS S66286) PER AMS5731, AMS5732, AMS5737 OR AMS5853 EXCEPT HEAT TREAT TO 180 KSI MIN. FINISH - CLEAN AND PASSIVATE PER AMS2700 METHOD 1, CLASS 4. T = OFFSET CRUCIFORM RECESS PER NASM33781. D = DRILLED SHANK. DOUBLE SHEAR STRENGTH: 6100.00 LBF MIN. P = ALUMINUM COAT PER NAS4006, NO CLASS. |
| SPECIFICATION/STANDARD DATA | 80205-NAS1992 THRU NAS2000 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS-QQ-P-416, TYPE II, CLASS 2 INTERNATIONAL STD/SPEC ALL TREATMENT RESPONSES AND NAS4006 INTERNATIONAL STD/SPEC ALL TREATMENT RESPONSES OVERALL |
| SURFACE TREATMENT | PASSIVATE AND ALUMINUM OVERALL |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.338 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 32 |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |