| EXTENDED WASHER DIAMETER | 0.691 INCHES MINIMUM AND 0.701 INCHES MAXIMUM |
| EXTENDED WASHER THICKNESS | 0.044 INCHES MINIMUM AND 0.064 INCHES MAXIMUM |
| FASTENER LENGTH | 2.544 INCHES MINIMUM AND 2.574 INCHES MAXIMUM |
| GRIP DIAMETER | 0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM |
| GRIP LENGTH | 1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM |
| HEAD HEIGHT | 0.337 INCHES NOMINAL |
| HEAD MINOR DIAMETER | 0.423 INCHES MINIMUM AND 0.438 INCHES MAXIMUM |
| HEAD STYLE | SPLINE EXTENDED WASHER |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,TENSION,INCONEL 718,220 KSI TENSILE,SPLINE DRIVE |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5662 OR AMS 5663 EXCEPT COLD WORKED AND AGED TO MEET 220 KSI MINIMUM ULTIMATE TENSILE STRENGTH ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | NICKEL ALLOY 718 OVERALL |
| MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.3750 INCHES |
| SPECIFICATION/STANDARD DATA | 97499-20-106 MANUFACTURERS STANDARD |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS-QQ-P-35 OR AMS 2700 METHOD 1,TYPES 2 OR 8,CLASS 1 ASSN STD 1ST TREATMENT RESPONSE AND AS5272 TYPE 1 ASSN STD 2ND TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE AND LUBRICANT OVERALL |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.659 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 24 |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |