| DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| FASTENER LENGTH | 0.600 INCHES MINIMUM AND 0.620 INCHES MAXIMUM |
| FEATURES PROVIDED | CETYL ALCOHOL LUBRICANT |
| FIRST DIAMETER FROM HEAD | 0.2016 INCHES MINIMUM AND 0.2026 INCHES MAXIMUM |
| HEAD DIAMETER | 0.2955 INCHES MINIMUM AND 0.3029 INCHES MAXIMUM |
| HEAD HEIGHT | 0.042 INCHES NOMINAL |
| HEAD STYLE | FLAT COUNTERSUNK |
| INTERNAL DRIVE STYLE | HEXAGON |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5662 OR AMS 5962 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | NICKEL ALLOY 718 OVERALL |
| III PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,100 DEG REDUCED SHEAR HEAD,HEX DRIVE,125 KSI SHEAR,NICKEL ALLOY 718 (NOMINAL AND OVERSIZE) |
| PROPRIETARY CHARACTERISTICS | PACS |
| NOMINAL THREAD DIAMETER | 0.1900 INCHES |
| SPECIAL FEATURES | CETYL ALCOHOL LUBE PER MIL-L-87132,TYPE I OR III,GRADE OPTIONAL |
| SPECIFICATION/STANDARD DATA | 81205-BACB30YN MANUFACTURERS STANDARD |
| WIDTH ACROSS FLATS | 0.0791 INCHES MINIMUM AND 0.0806 INCHES MAXIMUM |
| SURFACE FINISH | 32.0 MICROINCHES OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BMS10-85,TYPE 1,CLASS A MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | ALUMINUM OVERALL |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.360 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 32 |
| THREAD SERIES DESIGNATOR | UNJF |