| SHANK UNTHREADED HOLE DIAMETER | 0.124 INCHES MINIMUM AND 0.130 INCHES MAXIMUM SECOND HOLE |
| SPECIAL FEATURES | HEAD HAS A CENTRALLY LOCATED .125-27 NPT THREADED HOLE |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.700 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 18 |
| THREAD SERIES DESIGNATOR | UNEF |
| DISTANCE FROM CENTERLINE TO FLAT | 0.860 INCHES MINIMUM AND 0.900 INCHES MAXIMUM |
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 2.100 INCHES MINIMUM AND 2.140 INCHES MAXIMUM FIRST HOLE |
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 2.480 INCHES MINIMUM AND 2.520 INCHES MAXIMUM SECOND HOLE |
| FASTENER LENGTH | 4.940 INCHES NOMINAL |
| GRIP DIAMETER | 1.4990 INCHES MINIMUM AND 1.4995 INCHES MAXIMUM |
| GRIP LENGTH | 4.100 INCHES MINIMUM AND 4.140 INCHES MAXIMUM |
| HARDNESS RATING | 55.0 ROCKWELL C MINIMUM AND 60.0 ROCKWELL C MAXIMUM OVERALL |
| HEAD DIAMETER | 2.480 INCHES MINIMUM AND 2.520 INCHES MAXIMUM |
| HEAD HEIGHT | 0.360 INCHES MINIMUM AND 0.400 INCHES MAXIMUM |
| HEAD STYLE | DEE CHAMFER |
| HOLE NOMINAL THREAD DIAMETER | 0.313 INCHES |
| HOLE QUANTITY | 3 |
| HOLE THREAD QUANTITY PER INCH | 24 |
| HOLE TYPE | THREADED |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE AMS6265 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL OVERALL |
| III PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN, CONNECTING, ELEVATING MECHANISM, ROD END |
| PROPRIETARY CHARACTERISTICS | PACS |
| NOMINAL THREAD DIAMETER | 1.375 INCHES |
| SHANK UNTHREADED HOLE DIAMETER | 0.124 INCHES MINIMUM AND 0.130 INCHES MAXIMUM FIRST HOLE |