| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 0.991 INCHES MINIMUM AND 1.011 INCHES MAXIMUM ALL HOLES |
| EXTENDED WASHER DIAMETER | 0.349 INCHES MINIMUM AND 0.359 INCHES MAXIMUM |
| EXTENDED WASHER THICKNESS | 0.113 INCHES NOMINAL |
| FASTENER LENGTH | 1.102 INCHES MINIMUM AND 1.132 INCHES MAXIMUM |
| GRIP DIAMETER | 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| GRIP LENGTH | 0.750 INCHES NOMINAL |
| HEAD HEIGHT | 0.195 INCHES MINIMUM AND 0.215 INCHES MAXIMUM |
| HEAD MINOR DIAMETER | 0.253 INCHES NOMINAL |
| HEAD STYLE | SPLINE EXTENDED WASHER |
| HOLE QUANTITY | 1 |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, SPLINE FLANGE HEAD, INCO 718 CRES, 220 KSI TENSILE NOMINAL AND OVERSIZE |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | NICKEL ALLOY 718 OVERALL |
| MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.1900 INCHES |
| SHANK UNTHREADED HOLE DIAMETER | 0.070 INCHES MINIMUM AND 0.075 INCHES MAXIMUM ALL HOLES |
| SPECIAL FEATURES | DOUBLE SHEAR LBS MIN 7100; 100 PERCENT FLUORESCENT PENETRANT INSPECT PER MIL-STD-6866; ULTIMATE TENSILE LBS MIN 4770 |
| SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| SURFACE FINISH | 32.0 MICROINCHES GRIP |
| SURFACE FINISH | 32.0 MICROINCHES HEAD |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED STD SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.367 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 32 |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |