| EXTENDED WASHER DIAMETER | 0.349 INCHES MINIMUM AND 0.359 INCHES MAXIMUM |
| EXTENDED WASHER THICKNESS | 0.017 INCHES MINIMUM AND 0.037 INCHES MAXIMUM |
| FASTENER LENGTH | 1.091 INCHES NOMINAL |
| GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| GRIP LENGTH | 0.668 INCHES MINIMUM AND 0.698 INCHES MAXIMUM |
| HEAD HEIGHT | 0.195 INCHES MINIMUM AND 0.215 INCHES MAXIMUM |
| HEAD MINOR DIAMETER | 0.173 INCHES MINIMUM AND 0.188 INCHES MAXIMUM |
| HEAD STYLE | SPLINE EXTENDED WASHER |
| HOLE CONFIGURATION STYLE | SPLINE |
| HOLE DIAMETER | 0.032 INCHES MINIMUM AND 0.042 INCHES MAXIMUM |
| HOLE TYPE | DRILLED |
| HOLE QUANTITY | 4 |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, TENSION |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5663 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | NICKEL ALLOY 718 OVERALL |
| MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.1900 INCHES |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.408 INCHES NOMINAL |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| THREAD QUANTITY PER INCH | 32 |