|
|
|
National Stock Number:
5306-01-625-9777
Federal Supply Class:
5306
National Item Identification Number:
016259777
Description:
BOLT,SHEAR
Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.
|
Manufacturer Information:
| NAS676V9H | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE |
|
Techincal Specification:
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 0.939 INCHES NOMINAL ALL HOLES | | FASTENER LENGTH | 1.140 INCHES NOMINAL | | GRIP LENGTH | 0.562 INCHES NOMINAL | | GRIP DIAMETER | 0.3740 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM | | HEAD HEIGHT | 0.188 INCHES NOMINAL | | HEAD STYLE | HEXAGON | | HOLE CONFIGURATION STYLE | HEXAGON CORNERS | | HOLE DIAMETER | 0.106 INCHES NOMINAL | | HOLE QUANTITY | 3 | | HOLE TYPE | DRILLED | | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, TENSION, HEXAGON HEAD, CLOSE TOLERANCE | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS4928 FED SPEC SINGLE MATERIAL RESPONSE OR AMS4967 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | TITANIUM ALLOY UNS R56400 OVERALL | | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.3750 INCHES | | SHANK UNTHREADED HOLE DIAMETER | 0.106 INCHES NOMINAL ALL HOLES | | WIDTH BETWEEN FLATS | 0.553 INCHES MINIMUM AND 0.564 INCHES MAXIMUM | | THREAD CLASS | Q3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.578 INCHES NOMINAL | | THREAD QUANTITY PER INCH | M24 | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
|
|