5306-01-622-6709, BOLT,SHEAR

1560-01-622-4485 PLATE,STRUCTURAL,AIRCRAFT

National Stock Number:
5306-01-622-6709

Federal Supply Class:
5306

National Item Identification Number:
016226709

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

NAS6206-12DH

80205

NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE

Techincal Specification:

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	1.021 INCHES NOMINAL ALL HOLES
FASTENER LENGTH	1.189 INCHES MINIMUM AND 1.219 INCHES MAXIMUM
GRIP LENGTH	0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM
GRIP DIAMETER	0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM
HEAD HEIGHT	0.188 INCHES MINIMUM AND 0.203 INCHES MAXIMUM
HEAD STYLE	HEXAGON
HOLE CONFIGURATION STYLE	HEXAGON FLATS
HOLE DIAMETER	0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HOLE QUANTITY	3
HOLE TYPE	DRILLED
PART NAME ASSIGNED BY CONTROLLING AGENCY	BOLT,TENSION,HEX HEAD,CLOSE TOLERANCE,ALLOY STEEL,SHORT THREAD,REDUCED MAJOR DIA.,SELF-LOCKING AND NONLOCKING,160 KSI FTU
MATERIAL DOCUMENT AND CLASSIFICATION	AMS6349 OR 6382 NATIONAL STD/SPEC 1ST MATERIAL RESPONSE OR AMS6415 OR 6484 NATIONAL STD/SPEC 2ND MATERIAL RESPONSE OR AMS6322 NATIONAL STD/SPEC 3RD MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP 8740 OVERALL
MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.3750 INCHES
SHANK UNTHREADED HOLE DIAMETER	0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM ALL HOLES
SPECIFICATION/STANDARD DATA	80205-NAS6203 THRU 6220 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
WIDTH BETWEEN FLATS	0.554 INCHES MINIMUM AND 0.564 INCHES MAXIMUM
SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH	32.0 MICROINCHES THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE II,CLASS 2;EMBRITTLEMENT REQUIREMENT PER NAS4002 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.454 INCHES NOMINAL
THREAD QUANTITY PER INCH	24
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)

Click here to Register for Free 30-day Trial