5306-01-622-5590, BOLT,SHEAR

National Stock Number:
5306-01-622-5590

Federal Supply Class:
5306

National Item Identification Number:
016225590

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

NAS6606L17

80205

NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE

Techincal Specification:

FASTENER LENGTH	1.625 INCHES MINIMUM AND 1.655 INCHES MAXIMUM
GRIP DIAMETER	0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM
GRIP LENGTH	1.0525 INCHES MINIMUM AND 1.0725 INCHES MAXIMUM
HEAD HEIGHT	0.188 INCHES MINIMUM AND 0.203 INCHES MAXIMUM
HEAD STYLE	HEXAGON
LOCKING FEATURE	PATCH LOCKING FEATURE
PART NAME ASSIGNED BY CONTROLLING AGENCY	BOLT,TENSION,HEX HEAD,CLOSE TOLERANCE,ALLOY STEEL,LONG THREAD,REDUCED MAJOR DIA.,SELF-LOCKING AND NONLOCKING,160 KSI FTU
MATERIAL DOCUMENT AND CLASSIFICATION	AMS6349 OR 6382 NATIONAL STD/SPEC 1ST MATERIAL RESPONSE OR AMS6415 OR 6484 NATIONAL STD/SPEC 2ND MATERIAL RESPONSE OR AMS6322 NATIONAL STD/SPEC 3RD MATERIAL RESPONSE FASTENER
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-DTL-18240 AND QPL-18240 MIL SPEC SINGLE MATERIAL RESPONSE LOCKING FEATURE
MATERIAL	PLASTIC NYLON LOCKING FEATURE
MATERIAL	STEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP 8740 FASTENER
MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.3750 INCHES
SPECIFICATION/STANDARD DATA	80205-NAS6603 THRU 6620 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
WIDTH BETWEEN FLATS	0.554 INCHES MINIMUM AND 0.564 INCHES MAXIMUM
SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH	32.0 MICROINCHES THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE II,CLASS 2;EMBRITTLEMENT REQUIREMENT PER NAS4002 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
SURFACE TREATMENT	CADMIUM FASTENER
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.578 INCHES NOMINAL
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)
THREAD QUANTITY PER INCH	24

Click here to Register for Free 30-day Trial