6110-01-623-0654 CONTROLLER,ELECTRICAL 8415-01-623-1226 JACKET,PHYSICAL FITNESS UNIFORM

National Stock Number:
5306-01-622-4944

Federal Supply Class:
5306

National Item Identification Number:
016224944

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.


Manufacturer Information:
BACB30US7-24DHM81205THE BOEING COMPANY


Techincal Specification:
EXTENDED WASHER THICKNESS0.089 INCHES MINIMUM AND 0.109 INCHES MAXIMUM
EXTENDED WASHER DIAMETER0.740 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
FASTENER LENGTH2.218 INCHES MINIMUM AND 2.248 INCHES MAXIMUM
GRIP DIAMETER0.4365 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM
GRIP LENGTH1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM
HEAD HEIGHT0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HEAD STYLEDOUBLE HEXAGON W/HOLE
HOLE CONFIGURATION STYLEDOUBLE HEXAGON LONGITUDINAL HOLE
HOLE DIAMETER0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM
HOLE QUANTITY2
HOLE TYPEDRILLED
MATERIAL DOCUMENT AND CLASSIFICATIONAMS5662 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5962 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALNICKEL ALLOY 718 OVERALL
PROPRIETARY CHARACTERISTICSPACS
MINIMUM TENSILE STRENGTH220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.4375 INCHES
SHANK UNTHREADED HOLE DIAMETER0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM ALL HOLES
WIDTH BETWEEN FLATS0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONAMS2700 METHOD 1, TYPE 2 OR 8 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.733 INCHES NOMINAL
THREAD QUANTITY PER INCH20
THREAD SERIES DESIGNATORUNJF


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us