5306-01-616-9537, BOLT,SHEAR

3040-01-617-1585 CYLINDER ASSEMBLY,ACTUATING,LINE

National Stock Number:
5306-01-616-9537

Federal Supply Class:
5306

National Item Identification Number:
016169537

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

NAS6310-29D

80205

NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE

Techincal Specification:

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	2.019 INCHES NOMINAL ALL HOLES
FASTENER LENGTH	2.423 INCHES MINIMUM AND 2.453 INCHES MAXIMUM
GRIP DIAMETER	0.6230 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM
GRIP LENGTH	1.802 INCHES MINIMUM AND 1.822 INCHES MAXIMUM
HEAD HEIGHT	0.312 INCHES MINIMUM AND 0.327 INCHES MAXIMUM
HEAD STYLE	HEXAGON
PART NAME ASSIGNED BY CONTROLLING AGENCY	BOLT,TENSION,HEX HEAD,CLOSE TOLERANCE,A286 CRES,SHORT THREAD,REDUCED MAJOR DIAMETER,SELF-LOCKING OR NONLOCKING,160 KSI FTU
MATERIAL DOCUMENT AND CLASSIFICATION	AMS5731,5732,5737 OR AMS5853 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	IRON ALLOY 660 OVERALL
MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.6250 INCHES
SHANK UNTHREADED HOLE DIAMETER	0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM ALL HOLES
SPECIAL FEATURES	FINISH IS IDENTIFIED WITH GREEN DYE OR PAINT ON THREAD END;MAXIMUM COVERAGE MAY INCLUDE THE CHAMFER PLUS ON INCOMPLETE THREAD
SPECIFICATION/STANDARD DATA	80205-NAS6303 THRU 6320 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
WIDTH BETWEEN FLATS	0.928 INCHES MINIMUM AND 0.940 INCHES MAXIMUM
SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH	32.0 MICROINCHES THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE II,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.626 INCHES NOMINAL
THREAD QUANTITY PER INCH	18
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)

Click here to Register for Free 30-day Trial