|
|
|
National Stock Number:
5306-01-593-6605
Federal Supply Class:
5306
National Item Identification Number:
015936605
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| BACB30LJ4-5P | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
| SURFACE TREATMENT | CADMIUM AND | | CHROMATE OVERALL | | HEAD STYLE | UNDERCUT HEXAGON | | HEAD HEIGHT | 0.125 INCHES MINIMUM AND | | 0.140 INCHES MAXIMUM | | WIDTH BETWEEN FLATS | 0.430 INCHES MINIMUM AND | | 0.439 INCHES MAXIMUM | | LOCKING FEATURE | PATCH THREADS | | GRIP LENGTH | 0.303 INCHES MINIMUM AND | | 0.323 INCHES MAXIMUM | | GRIP DIAMETER | 0.248 INCHES MINIMUM AND | | 0.249 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD | | 32.0 MICROINCHES GRIP | | 32.0 MICROINCHES THREADS | | THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | THREAD QUANTITY PER INCH | 28 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.364 INCHES MINIMUM AND | | 0.414 INCHES MAXIMUM | | FASTENER LENGTH | 0.687 INCHES MINIMUM AND | | 0.717 INCHES MAXIMUM | | MATERIAL | IRON ALLOY 660 OVERALL |
|
|