|
|
|
National Stock Number:
5306-01-582-3263
Federal Supply Class:
5306
National Item Identification Number:
015823263
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| MS27576-7-44 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | NASM27576-7-44 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.437 INCHES | | THREAD QUANTITY PER INCH | 20 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | FASTENER LENGTH | 3.045 INCHES NOMINAL | | MATERIAL | STEEL OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS-P-416,TYPE II,CLASS 2 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | HEAD STYLE | HEXAGON | | HEAD HEIGHT | 0.220 INCHES MINIMUM AND | | 0.235 INCHES MAXIMUM | | WIDTH BETWEEN FLATS | 0.617 INCHES MINIMUM AND | | 0.627 INCHES MAXIMUM | | GRIP LENGTH | 2.750 INCHES MINIMUM AND | | 2.766 INCHES MAXIMUM | | GRIP DIAMETER | 0.435 INCHES MINIMUM AND | | 0.437 INCHES MAXIMUM | | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,SELF-RETAINING,IMPEDANCE TYPE,95 KSI FSU,HEX HEAD,450 DEGREES F |
|
|