|
|
|
National Stock Number:
5306-01-581-9415
Federal Supply Class:
5306
National Item Identification Number:
015819415
Description:
BOLT,SHEAR
Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.
|
Manufacturer Information:
| BACB30NM6DK17 | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
| FASTENER LENGTH | 1.813 INCHES MINIMUM AND 1.858 INCHES MAXIMUM | | GRIP DIAMETER | 0.373 INCHES MINIMUM AND 0.374 INCHES MAXIMUM | | GRIP LENGTH | 1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM | | HEAD HEIGHT | 0.188 INCHES MINIMUM AND 0.203 INCHES MAXIMUM | | HEAD STYLE | DISHED HEXAGON | | MATERIAL | TITANIUM ALLOY UNS R56400 OVERALL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, HEX HEAD, 160 KSI MIN TENSILE, LONG THREAD, 6AL-4V TITANIUM, NON-LOCKING | | PROPRIETARY CHARACTERISTICS | PACS | | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.375 INCHES | | SPECIAL FEATURES | HAS DRILLED SHANK, HOLE DIAMETER BETWEEN 0.106 AND 0.116 INCHES, LOCATED 0.197 INCHES FROM THREADED END OF BOLT | | WIDTH BETWEEN FLATS | 0.553 INCHES MINIMUM AND 0.564 INCHES MAXIMUM | | SURFACE TREATMENT | ALUMINUM OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.573 INCHES MINIMUM AND 0.583 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 24 | | THREAD SERIES DESIGNATOR | UNJF |
|
|