|
|
|
National Stock Number:
5306-01-581-6169
Federal Supply Class:
5306
National Item Identification Number:
015816169
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| BACB30LT10K28 | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.625 INCHES | | THREAD QUANTITY PER INCH | 18 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.632 INCHES MINIMUM AND | | 0.642 INCHES MAXIMUM | | FASTENER LENGTH | 1.712 INCHES MINIMUM AND | | 1.762 INCHES MAXIMUM | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | ALUMINUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BMS 10-85, TY 1, C L A ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | MINIMUM TENSILE STRENGTH | 110000 POUNDS PER SQUARE INCH | | HEAD STYLE | DOUBLE HEXAGON | | HEAD HEIGHT | 0.340 INCHES MINIMUM AND | | 0.360 INCHES MAXIMUM | | WIDTH BETWEEN FLATS | 0.928 INCHES MINIMUM AND | | 0.940 INCHES MAXIMUM | | GRIP LENGTH | 1.740 INCHES MINIMUM AND | | 1.760 INCHES MAXIMUM | | GRIP DIAMETER | 0.6226 INCHES MINIMUM AND | | 0.6240 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD | | 32.0 MICROINCHES GRIP | | 32.0 MICROINCHES THREADS | | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, 12 POINT HEAD, SHORT THREAD, CLOSE TOL, A286 CRES, 110 KSI MIN SHEAR |
|
|