2915-01-560-7602 ACTUATOR,ELECTRO-MECHANICAL,LINE Index 1560-01-560-7604 FOAM SEGMENT,EXPLOSION SUPPRESSA

National Stock Number:
5306-01-560-7603

Federal Supply Class:
5306

National Item Identification Number:
015607603

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.


Manufacturer Information:
NAS6603DH280205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER0.306 INCHES NOMINAL FIRST HOLE
FASTENER LENGTH0.455 INCHES MINIMUM AND 0.485 INCHES MAXIMUM
GRIP LENGTH0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM
GRIP DIAMETER0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM
HEAD HEIGHT0.110 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
HEAD STYLEDISHED HEXAGON
HOLE CONFIGURATION STYLEHEXAGON CORNERS
HOLE DIAMETER0.046 INCHES MINIMUM AND 0.056 INCHES MAXIMUM
HOLE TYPEDRILLED
HOLE QUANTITY3
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE OR AMS 6415 ASSN STD SINGLE MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.190 INCHES
PART NAME ASSIGNED BY CONTROLLING AGENCYNAVY SPECIAL PROJECT
SHANK UNTHREADED HOLE DIAMETER0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM FIRST HOLE
WIDTH BETWEEN FLATS0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416, TYPE II. CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.345 INCHES NOMINAL
THREAD SERIES DESIGNATORUNIFIED NATIONAL JOINT FINE (UNJF)
THREAD QUANTITY PER INCH32


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us