|
|
|
National Stock Number:
5306-01-532-1311
Federal Supply Class:
5306
National Item Identification Number:
015321311
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| MS27576-6-17 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS27576-6-17 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD DIAMETER | 0.375 INCHES | | THREAD QUANTITY PER INCH | 24 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.533 INCHES MINIMUM AND | | 0.549 INCHES MAXIMUM | | FASTENER LENGTH | 1.601 INCHES MINIMUM AND | | 1.621 INCHES MAXIMUM | | MATERIAL | STEEL COMP 630 OR | | STEEL COMP 631 OR | | STEEL COMP 440C LOCKING FEATURE | | STEEL FASTENER | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643, 17-4PH ASSN STD SINGLE MATERIAL RESPONSE OR | | AMS 5644, 17-7PH ASSN STD SINGLE MATERIAL RESPONSE OR | | AMS 5678, 17-7PH ASSN STD SINGLE MATERIAL RESPONSE OR | | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE LOCKING FEATURE | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416, TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND | | 41.0 ROCKWELL C MAXIMUM OVERALL | | MINIMUM TENSILE STRENGTH | 95000 POUNDS PER SQUARE INCH | | HEAD STYLE | CROWNED HEXAGON | | HEAD HEIGHT | 0.189 INCHES MINIMUM AND | | 0.204 INCHES MAXIMUM | | WIDTH BETWEEN FLATS | 0.553 INCHES MINIMUM AND | | 0.564 INCHES MAXIMUM | | GRIP LENGTH | 1.062 INCHES MINIMUM AND | | 1.078 INCHES MAXIMUM | | GRIP DIAMETER | 0.3733 INCHES MINIMUM AND | | 0.3743 INCHES MAXIMUM | | SURFACE FINISH | 63.0 MICROINCHES GRIP | | POINT STYLE | FLAT | | POINT DIAMETER | 0.327 INCHES NOMINAL | | SPECIAL FEATURES | SELF-RETAINING; IMPEDANCE TYPE |
|
|