|
|
|
National Stock Number:
5306-01-527-3828
Federal Supply Class:
5306
National Item Identification Number:
015273828
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| BACB30LJ10-31 | 81205 | THE BOEING COMPANY | | BACB30NF10-31 | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.625 INCHES | | THREAD QUANTITY PER INCH | 18 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.637 INCHES NOMINAL | | FASTENER LENGTH | 2.575 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5737 ASSN STD SINGLE MATERIAL RESPONSE OR | | AMS5853 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY2,CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HEAD STYLE | HEXAGON | | HEAD HEIGHT | 0.312 INCHES NOMINAL | | WIDTH BETWEEN FLATS | 0.928 INCHES MINIMUM AND | | 0.940 INCHES MAXIMUM | | HOLE CONFIGURATION STYLE | HEXAGON CORNERS | | HOLE TYPE | DRILLED | | HOLE QUANTITY | 3 | | HOLE DIAMETER | 0.070 INCHES MINIMUM AND | | 0.080 INCHES MAXIMUM | | GRIP LENGTH | 1.938 INCHES NOMINAL | | GRIP DIAMETER | 0.6224 INCHES MINIMUM AND | | 0.6230 INCHES MAXIMUM |
|
|