5306-01-521-2933, BOLT,SHEAR

National Stock Number:
5306-01-521-2933

Federal Supply Class:
5306

National Item Identification Number:
015212933

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

NAS6204L7H

80205

NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE

Techincal Specification:

FASTENER LENGTH	0.808 INCHES NOMINAL
GRIP DIAMETER	0.248 INCHES MINIMUM AND 0.249 INCHES MAXIMUM
GRIP LENGTH	0.438 INCHES NOMINAL
HEAD HEIGHT	0.125 INCHES MINIMUM AND 0.140 INCHES MAXIMUM
HEAD STYLE	DISHED HEXAGON
HOLE CONFIGURATION STYLE	HEXAGON CORNERS
HOLE DIAMETER	0.048 INCHES MINIMUM AND 0.058 INCHES MAXIMUM
HOLE QUANTITY	3
HOLE TYPE	DRILLED
LOCKING FEATURE	PATCH OR PELLET OR STRIP THREADS
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 6415 ASSN STD 1ST MATERIAL RESPONSE OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE BEARING SURFACE OF HEAD
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-DTL-18240 MIL SPEC SINGLE MATERIAL RESPONSE LOCKING FEATURE
MATERIAL	PLASTIC POLYAMIDE NYLON LOCKING FEATURE
MATERIAL	STEEL COMP 4340 OR STEEL COMP 8740 BEARING SURFACE OF HEAD
MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.250 INCHES
SPECIFICATION/STANDARD DATA	80205-NAS6204 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
WIDTH BETWEEN FLATS	0.429 INCHES MINIMUM AND 0.439 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416, TYII, CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.370 INCHES NOMINAL
THREAD QUANTITY PER INCH	28
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)

Click here to Register for Free 30-day Trial