5340-01-512-2115 BRACKET,MOUNTING Index 4320-01-512-2117 SEAL ASSEMBLY,SHAFT,SPRING LOADE

National Stock Number:
5306-01-512-2116

Federal Supply Class:
5306

National Item Identification Number:
015122116

Description:
BOLT,MACHINE

Detail:
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.


Manufacturer Information:
13535854C103KT1ANIXTER
3535854C103KT1ANIXTER
3535854C1338X5ND DEFENSE LLC
3535854C189346NAVISTAR INTL CORP TRUCK BR OHIO PLANT


Techincal Specification:
EXTENDED WASHER THICKNESS0.090 INCHES MINIMUM AND 0.117 INCHES MAXIMUM
EXTENDED WASHER DIAMETER0.805 INCHES MINIMUM AND 0.827 INCHES MAXIMUM
FASTENER LENGTH1.975 INCHES MINIMUM AND 2.013 INCHES MAXIMUM
FEATURES PROVIDEDHEX NUT AND WASHER
HARDNESS RATING35.0 ROCKWELL C MINIMUM AND 39.0 ROCKWELL C MAXIMUM FASTENER
HARDNESS RATING39.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM PRIMARY WASHER
HEAD HEIGHT0.430 INCHES MINIMUM AND 0.480 INCHES MAXIMUM
HEAD MINOR DIAMETER0.420 INCHES MINIMUM
HEAD STYLESPLINE DRIVE SHEAR HEAD
MATERIALSTEEL COMP 1050 OR STEEL COMP 1053 OR STEEL COMP 1054 OR STEEL COMP 1055 OR STEEL COMP 1059 OR STEEL COMP 1060 PRIMARY WASHER
MATERIALSTEEL PROPERTY CLASS 8.8 FASTENER
III PART NAME ASSIGNED BY CONTROLLING AGENCYBOLT,SPECIAL 12-PT TORQUE-OFF HEAD
PROPRIETARY CHARACTERISTICSPACS
NOMINAL THREAD DIAMETER0.4375 INCHES
SPECIAL FEATURESNUT OVERALL HEIGHT: 0.272"-0.291", WIDTH BETWEEN FLATS: 0.698"-0.708"; FINISH: PHOSPHATE COATING, PLUS EVERLUBE 6102G AND HENKEL OIL 2945; 72 HOURS MINIMUM TO RED RUST
WIDTH BETWEEN FLATS0.698 INCHES MINIMUM AND 0.708 INCHES MAXIMUM
SURFACE TREATMENTPHOSPHATE OVERALL
THREAD CLASS2A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH1.050 INCHES MINIMUM
THREAD QUANTITY PER INCH20
THREAD SERIES DESIGNATORUNRF


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us