5306-01-481-9838, BOLT,SHEAR

5915-01-481-9839 FILTER,RADIO FREQUENCY INTERFERE

National Stock Number:
5306-01-481-9838

Federal Supply Class:
5306

National Item Identification Number:
014819838

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

NAS6212-40D	0JV78	J M PRECISION INC
NAS6212-40D	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE

Techincal Specification:

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	2.934 INCHES MINIMUM AND 2.954 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH	3.151 INCHES MINIMUM AND 3.181 INCHES MAXIMUM
GRIP DIAMETER	0.7480 INCHES MINIMUM AND 0.7490 INCHES MAXIMUM
GRIP LENGTH	2.490 INCHES MINIMUM AND 2.510 INCHES MAXIMUM
HEAD HEIGHT	0.375 INCHES MINIMUM AND 0.390 INCHES MAXIMUM
HEAD STYLE	DISHED HEXAGON
MATERIAL DOCUMENT AND CLASSIFICATION	AMS6349 ASSN STD 1ST MATERIAL RESPONSE OR AMS6484 ASSN STD 2ND MATERIAL RESPONSE OR AMS6415 ASSN STD 2ND MATERIAL RESPONSE OR AMS6322 ASSN STD 3RD MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP 8740 OVERALL
MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.750 INCHES
SHANK UNTHREADED HOLE DIAMETER	0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE
WIDTH BETWEEN FLATS	1.052 INCHES MINIMUM AND 1.065 INCHES MAXIMUM
SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE 3,CLASS2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.641 INCHES MINIMUM AND 0.691 INCHES MAXIMUM
THREAD QUANTITY PER INCH	16
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)

Click here to Register for Free 30-day Trial