5306-01-465-4617, BOLT,SHEAR

National Stock Number:
5306-01-465-4617

Federal Supply Class:
5306

National Item Identification Number:
014654617

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

3D0166-22-58	88277	THE BOEING COMPANY
84366-22-58	56878	SPS TECHNOLOGIES, LLC

Techincal Specification:

EXTENDED WASHER DIAMETER	2.539 INCHES MINIMUM AND 2.549 INCHES MAXIMUM
EXTENDED WASHER THICKNESS	0.188 INCHES MINIMUM AND 0.208 INCHES MAXIMUM
FASTENER LENGTH	5.589 INCHES MINIMUM AND 5.619 INCHES MAXIMUM
GRIP DIAMETER	1.3725 INCHES MINIMUM AND 1.3740 INCHES MAXIMUM
GRIP LENGTH	3.615 INCHES MINIMUM AND 3.635 INCHES MAXIMUM
HEAD HEIGHT	1.090 INCHES MINIMUM AND 1.110 INCHES MAXIMUM
HEAD MINOR DIAMETER	1.485 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
HEAD STYLE	SPLINE EXTENDED WASHER
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5842 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	COBALT ALLOY MP-159 OVERALL
MINIMUM TENSILE STRENGTH	260000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	1.375 INCHES
SINGLE SHEAR STRENGTH	ERR-060
SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	1.979 INCHES NOMINAL
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)
THREAD QUANTITY PER INCH	12

Click here to Register for Free 30-day Trial