5306-01-446-3145, BOLT,SHEAR

National Stock Number:
5306-01-446-3145

Federal Supply Class:
5306

National Item Identification Number:
014463145

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

03A099-7D24	76823	NORTHROP GRUMMAN SYSTEMS CORPORATION
AIC1654-7D24	06725	SPS TECHNOLOGIES, LLC
VCG0016-7D24	06710	VALLEY-TODECO, INC.
PBF1421-7D24	27624	SPS TECHNOLOGIES LLC
SII1182-7D24	57928	SONIC INDUSTRIES, INC.

Techincal Specification:

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	0.224 INCHES MINIMUM AND 0.234 INCHES MAXIMUM FIRST HOLE
EXTENDED WASHER DIAMETER	0.807 INCHES MINIMUM AND 0.817 INCHES MAXIMUM
EXTENDED WASHER THICKNESS	0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM
FASTENER LENGTH	2.190 INCHES MINIMUM AND 2.220 INCHES MAXIMUM
GRIP DIAMETER	0.4360 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM
GRIP LENGTH	1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM
HEAD HEIGHT	0.383 INCHES MINIMUM AND 0.403 INCHES MAXIMUM
HEAD MINOR DIAMETER	0.485 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
HEAD STYLE	SPLINE EXTENDED WASHER
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	NICKEL ALLOY 718 OVERALL
MINIMUM TENSILE STRENGTH	220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.437 INCHES
SHANK UNTHREADED HOLE DIAMETER	0.106 INCHES MINIMUM AND 0.111 INCHES MINIMUM FIRST HOLE
SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE FINISH	32.0 MICROINCHES THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.750 INCHES NOMINAL
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)
THREAD QUANTITY PER INCH	20

Click here to Register for Free 30-day Trial