5306-01-424-0422, BOLT,SHEAR

National Stock Number:
5306-01-424-0422

Federal Supply Class:
5306

National Item Identification Number:
014240422

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

MS14181H05006P

96906

MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

EXTENDED WASHER DIAMETER	0.575 INCHES MINIMUM AND 0.585 INCHES MAXIMUM
EXTENDED WASHER THICKNESS	0.035 INCHES MINIMUM AND 0.055 INCHES MAXIMUM
FASTENER LENGTH	0.974 INCHES MINIMUM AND 1.004 INCHES MAXIMUM
GRIP LENGTH	0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
GRIP DIAMETER	0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
HEAD HEIGHT	0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD MINOR DIAMETER	0.360 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD STYLE	SPLINE EXTENDED WASHER
HOLE CONFIGURATION STYLE	SPLINE
HOLE DIAMETER	0.060 INCHES MINIMUM AND 0.070 INCHES MAXIMUM
HOLE QUANTITY	4
HOLE TYPE	DRILLED
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5662 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5663 ASSN STD 2ND MATERIAL RESPONSE OVERALL
MATERIAL	NICKEL ALLOY 718 OVERALL
MINIMUM TENSILE STRENGTH	220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.3125 INCHES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416, TYPE II,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.589 INCHES NOMINAL
THREAD QUANTITY PER INCH	24
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)

Click here to Register for Free 30-day Trial